EL750-C - make it - EL750 2A Mill + Lathe without options
EL6C-21-1000 Add to Enquiry
EL752-C - make it - EL750 2A Mill + Lathe with options
EL6C-21-1110 Add to Enquiry
EL703-C - make it - EL750 3A Mill + Lathe without options
EL6C-31-1000 Add to Enquiry
EL713-C - make it - EL750 3A Mill + Lathe with options
EL6C-31-1110 Add to Enquiry
EL704-C - make it - EL750 4A Mill + Lathe without options
EL6C-41-1000 Add to Enquiry
EL714-C - make it - EL750 4A Mill + Lathe with options
EL6C-41-1110 Add to Enquiry

Product Description:

The EL750 a 4 axes DRO with 7" color TFT display is a master piece in its segment. Its dynamic tool position display, soft touch keyboard provide ease of operation, hence improves the productivity. Also the attractive aluminum die casted case design provides a longer life.

EL750 on shop floor makes any machining operation fast and cost effective thanks to its dynamic tool position display, 4 axes version with simultaneous 4 axis display with option of internal summing of two axis, feed rate indication. EL750 stands out for its advanced features and easy user interface.

EL750 along with standard RS422 encoders, also accepts legacy 1Vpp and 11�A encoders and distance coded encoders also.

Generic Functions
  • Sub datum (1000 steps)
  • Home / Machine reference
  • Half Function
  • Probe measurements
  • Job timer
  • Shrinkage factor entry
  • Vibration filter
  • Distance-to-go function
  • Password protected mode
  • Trigonometric calculator
  • USB and RS 232 option for communication
  • Auxiliary input / output option
  • Angular Axis configuration
  • Encoder fail detection
  • Feed rate display
  • Axis Limit with beep indication
Mill /EDM Sepcific Functions
  • Bolt Hole circular
  • Bolt Hole arc
  • Arc contouring
  • R function
  • Grid array function
  • Frame function
  • Pocketing function
  • Linear Bolt Hole function
  • Slot function
  • Tool database
  • Preset Depth (for EDM model only)
  • Vertical Milling function
Lathe Specific Functions
  • Tool Offsets 99 nos
  • Axis Summing
  • Axis vectoring
  • Taper Calculations
  • Rad /Dia. display
Features Details
No. Axes 2/3/4
Display 7 " TFT Colour display with LED Backlight
Case Die-cast Aluminium
Power 90...265VAC (50/60 Hz) 15W SMPS
Storage Temperature -20°C to +70°C /-4°F to +158°F
Operating Temperature 0°C to +50°C / 32°F to +122°F
Relative Humidity 20% to 85% Non-condensing
Dimensions (HxWxD) 192mm x 290mm x 76mm
USB Service Port Fitted as standard
Auxiliary Port Optional
  • Single arm stand
  • Double arm stand
  • Swivel mount assembly DRO
  • Auxiliary Output box for Automation
  • Remote Control for Machine Tool DRO

Some of our Clients